Rebuilding A Wrecked 2013 Nissan GTR Part 4



    GRIND HARD TVHace 3 días

    That trump sticker got me tight on 13:46

  2. Nick Sheron

    Nick SheronHace 7 días

    make it a widebody create your own

  3. Nick Sheron

    Nick SheronHace 7 días

    upgrade your crank and cams make it a alpha 12

  4. Paul Marquis

    Paul MarquisHace 10 días

    You probably don’t want to be welding with 220 on wet pavement. Any experts disagree?

  5. sea97stroker

    sea97strokerHace 10 días

    When welding with wire feed...push the puddle guys were pulling it backwards. Stick welder you pull it like you were with when testing the welder. Nice work on the car!

  6. Derrick Avila

    Derrick AvilaHace 16 días

    Welding tip: drop dimes. The welds should look like little dimes overlapping each other. Great welds though guys. You guys are an inspiration to the DIY in all of us. I love your letters try it attitude. You can't become an expert unless you try and try again. Great work!

  7. Allan Bettencourt

    Allan BettencourtHace 18 días

    @greg Ferreira

  8. cute girl458

    cute girl458Hace un mes

    pleeeeaaaase wide body the gtr rocket bunny to be exact

  9. Bruno Rodrigues

    Bruno RodriguesHace 2 meses

    Keep up the good work I love your videos

  10. jcontradiction

    jcontradictionHace 2 meses

    I love that these guys are TRUMP supporters

  11. Dada Jones

    Dada JonesHace 3 meses

    Love the content btw

  12. Dada Jones

    Dada JonesHace 3 meses

    How do you guys afford this shit

  13. Russ Meredith

    Russ MeredithHace 3 meses

    You guys are so disorganized, it's not even funny. You buy a welder that requires 220, but you don't have a 220 outlet!!

  14. steven sparkz

    steven sparkzHace 5 meses

    I wanna know who the fucking idiot in the comment setion gave them the idea to change the suspension??? show your face

  15. Troy Marshall

    Troy MarshallHace 5 meses

    Okay I cant quite firgue this out. Did you guys buy a used bumper or what? Because that bumper looks like its been on a car already and driven with.

  16. dj buck

    dj buckHace 5 meses

    Guys killer work. Better than most professionals. Keep up the good work.


    iDESIGNS CPMHace 5 meses

    why not make it wide?

  18. B H

    B HHace 5 meses

    Worked for the company who made the hood hinges

  19. GTABladerunner4

    GTABladerunner4Hace 6 meses

    Pause at 0:06 leaked car

  20. Jay Read

    Jay ReadHace 6 meses

    Does the camera guy make any decisions or just repeat what his brother just said? So submissive.

  21. Emmanuel Oni

    Emmanuel OniHace 6 meses

    BRO, where do these dudes work? I know ESreporter doesn't pay that much for them to dedicate their income on a rebuild. I'm proud of these cats, regardless.

  22. Craig Porter

    Craig PorterHace 5 meses

    They probably get about $5,000 week just on ESreporter subs. That might be a bit high. Probably make a bit off of merchandise as well.

  23. jus235tin

    jus235tinHace 6 meses

    Wassup bro

  24. Roblox Gamer

    Roblox GamerHace 6 meses

    putt a carbon ceramic brakes

  25. Gage Lollar

    Gage LollarHace 6 meses

    If you look on the back of the plate you were welding on you can see if there is penetration. If there are marks on the back you have good penetration

  26. Jay Brudden

    Jay BruddenHace 6 meses

    the welding machine cost more than the wrecked gtr lol.. 12,000 for a Lincoln welding machine

  27. Imanol Lopez

    Imanol LopezHace 6 meses

    Jay Brudden how much do you think that gtr costs? Lmao I’m positive it was over 12,000

  28. Dino Mren

    Dino MrenHace 6 meses

    Wishing i could drive that car my dream

  29. Dude XS

    Dude XSHace 6 meses


  30. Dusik Padtong

    Dusik PadtongHace 6 meses

    Tht cute cat perfect position also the dog become security for them to do work peacefully..haha lol tht godzilla for u..

  31. carlos

    carlosHace 6 meses

    A lil pointer here after watching the part where you were taking off the emblem instead of using a heat gun I usually use a 16lb fishing line to cut through the double sided tape better so you won't have to pull the emblem and possibly of cracking or breaking it.

  32. silent 神

    silent 神Hace 6 meses

    The red its horrible xD, why just dont buy it black?

  33. J3LLY

    J3LLYHace 6 meses

    Make an rocket bunny gtr dude, thats what im gona do when i buy an gtr r35

  34. karl knudson

    karl knudsonHace 7 meses

    you can scratch pad wet with soapy water with grey scratch pad not red its to rough you can clear over grey and see no scratches red you will see scratches works paerfect when blrnding psnels then clear whole part blend color half way down panel start off just with a quarter of panel and every coat of color pull it back little farther in panel then clear the whole panel so you dont seee no blend mark were you stoped clearing

  35. karl knudson

    karl knudsonHace 7 meses

    spray nitrous right into the intake compresser houseing of turbo aim the spray nozzel to hit the back side of spoool so the force of the spray spools up the turbo plus the nitrous will make more power and eliminate any kind of lag ib the turbo

  36. Ski Crazy

    Ski CrazyHace 7 meses

    100% Argon will be fine, it's the machine that's not set up properly. I use Cougar gas when I use my MIG I think it's better again than Argon. CO2 is crap on its own.

  37. Zac Holding

    Zac HoldingHace 7 meses

    it shouldn't be oem it should be oge [ original goonsquad edition ]

  38. Jolt X P

    Jolt X PHace 7 meses

    i suggest trying to push the weld instead of pull ive been doing mig/tig for 5 years just a tip :D

  39. DLoad This1

    DLoad This1Hace 8 meses

    Hi Guys, Here's a word of caution: When you are changing out your coolant... BE SURE your cat is locked away safe inside your house. Coolant is very sweet to the taste and all it would take is for your cat to come by and take a few licks of it and you could end up with a dead cat. As felines have highly developed senses, they can easily smell the strong scent coming from the antifreeze, especially from its main ingredient, ethylene glycol. The flavor of the liquid is also highly appealing to cats. ... Even as little as a teaspoonful of antifreeze can harm your cat in FATAL ways. It's better to be safe than sorry!

  40. David Smith

    David SmithHace 8 meses

    Now I want grits

  41. 4878 West Texas

    4878 West TexasHace 8 meses

    Should have left the damn clear Bra on... now you have created more work and expense!! 😂

  42. Kim S17

    Kim S17Hace 8 meses

    Just a suggestion. Liberty walk body kit

  43. Ladosligese

    LadosligeseHace 8 meses

    what colour are you going to paint the hood :-p .. not funny ? :D

  44. Curado C.S

    Curado C.SHace 9 meses

    Watching this gtr build over and over again(from beginning till end) while waiting for the s2000 new video..

  45. Brian French

    Brian FrenchHace 9 meses

    Love your enthusiasm not a car buff but enjoy your energy and determination. Warmest regards to Thomas.

  46. Cypress Thunder

    Cypress ThunderHace 9 meses

    The clearcoat pealing is why you dont pull up when removing clear bra

  47. Weng Sheng CHANNEL

    Weng Sheng CHANNELHace 9 meses

    nice GTR dream car my XD...

  48. Jon Focker

    Jon FockerHace 10 meses

    i really love the exhaust on the GTR. perfect sound

  49. vincentiPad

    vincentiPadHace 10 meses

    love the chmeistry between you two, relly sounds like thebest of friends,

  50. Eugene Osbourne

    Eugene OsbourneHace 10 meses

    Hey boy,s that welder is just LEGIT!! Frikkin awesome

  51. charles vane

    charles vaneHace 10 meses

    It needs a big wang like a big one


    EZOPERATORHace 10 meses

    Came for the Lambo stayed for it all. Would love to see a behind the scenes interview as to how you got the idea and learned how to shoot and edit.

  53. Landon Orduno

    Landon OrdunoHace 10 meses

    You should rebuild a crv 2019

  54. EST plays

    EST playsHace 10 meses

    that lady is cool :)

  55. Terrell Walton

    Terrell WaltonHace 10 meses

    13:47 anyone else notice the Trump sticker?

  56. Trevor S

    Trevor SHace 10 meses

    Terrell Walton Dude, can you hear them? What else would you expect

  57. τρελος και μαρεσει

    τρελος και μαρεσειHace 11 meses

    you dont paint new hinges!under the fender maybe rust

  58. warkrak

    warkrakHace 11 meses

    Anyone know the song @2:10?

  59. Eric McManus

    Eric McManusHace 11 meses

    What were you doing to actually adjust the fenders if you noticed they weren't aligned with the hood? I don't see how simply taking it off and on eventually aligns it. So do you mind telling us what it was you did to align them?

  60. Louie J

    Louie JHace 11 meses

    These dudes sound like Joe Dirt. DANG!!!!!!!

  61. Justin Langley

    Justin LangleyHace 11 meses

    I don't like as many of y'all videos as I should, bc they're all really really helpful when buddies ask me for advice. I recommend y'all on ESreporter and I give em info on the question. But anyways great job guys 👌👌 looking forward to seein more

  62. Jason Armstrong

    Jason ArmstrongHace 11 meses

    Too Cold Crank that thing !!

  63. Mohammed Riyadh

    Mohammed RiyadhHace 11 meses